Bohr model of Sulfur atom - How to draw Sulfur(S) Bohr-Rutherford diagram?
The Bohr Model of Sulfur(S) has a nucleus that contains 16 neutrons and 16 protons. This nucleus is surrounded by three-electron shells named K-shell, L-shell, and M-shell. The outermost shell in the Bohr diagram of Sulfur contains 6 electrons that also called valence electrons.
|Name||Sulfur Bohr Model|
|Number of neutrons||16|
|Number of protons||16|
|Number of electrons||16|
|Total electron shells||3|
|Electron in the First shell(K)||2|
|Electrons in the Second shell(L)||8|
|Electrons in the Third shell(M)||6|
|Total valence electrons in Sulfur||6|
How to draw Bohr Model of Sulfur(S)?
Bohr model describes the visual representation of orbiting electrons around the small nucleus. It used different electron shells such as K, L, M, N…so on. These shells hold a specific number of electrons, the electron shell which is closest to the nucleus has less energy and the electron shell which is farthest from the nucleus has more energy.
Bohr diagram is very interesting and easy to draw. Here, we will draw the Bohr diagram of the Sulfur atom with some simple steps.
Steps to draw the Bohr Model of Sulfur atom
1. Find the number of protons, electrons, and neutrons in the Sulfur atom
Protons are the positively charged particles and neutrons are the uncharged particles, both these are constituents of the atom nuclei. Electrons are the negatively charged particles that orbit the nucleus of an atom
To find the number of protons an atom contains, just look at their atomic number.
If the atomic number of atom is 29, then proton will also be 29, if atomic number is 30, then proton will also be 30.
So, the atomic number for Sulfur is 16, hence, the number of protons in the Sulfur atom is also 16.
Now, to determine the number of neutrons in an atom, use this formula.
⇒ Number of neutrons in atom = Atomic mass of the atom(rounded to the nearest whole number) – Number of proton in an atom
For example, An atom have 16.977 atomic mass and 7 protons.
Then, to find the number of neutron, round the atomic mass to the near whole number, so, atomic mass 16.977 round to 17.
= (17 – 7 protons) = 10 number of neutrons in the atom
Now, To get the number of neutrons in a Sulfur atom, look at its atomic mass which is 32.065 rounded to 32, and the number of protons in Sulfur is 16.
∴ Hence, the number of neutrons in Sulfur atom = (32 – 16) = 16
It should be noted that “The number of electrons in a neutral atom is equal to the number of protons”.
So, the Sulfur atom is neutral, hence, its number of electrons will be equal to the number of protons which is 16 as we already discussed.
⇒ The number of electrons in Sulfur atom = 16
⇒ The number of protons in Sulfur atom = 16
⇒ The number of neutrons in Sulfur atom = 16
2. Draw the nucleus of an atom
A nucleus is a dense and small region that contains the number of protons and neutrons of an atom.
In this step, we have to draw a small circle that consists of a number of protons and the number of neutrons of a Sulfur atom.
3. Draw the First electron shell
“An electron shell may be thought of as an orbit followed by electrons around an atom’s nucleus.”
The first electron shell is also called the K-shell, this is the closest shell to the nucleus of an atom and can hold a maximum of two electrons.
As we know, the Sulfur atom has a total of 16 electrons. So, put two electrons from it, in the first shell, next to each other.
We have successfully drawn the first shell of the Sulfur atom that can hold 2 electrons. As a Sulfur atom has a total of 16 electrons, and from 16 electrons we have used two electrons in the first shell.
∴ (16 – 2) = 14 electrons
Therefore, we are left with 14 electrons, let’s put them in the next shells of the Sulfur atom.
4. Draw the Second electron shell
The second shell also called the L-shell that can hold a maximum of 8 electrons. This shell is drawn after the first electron shell.
In the second electron shell, the electrons are added one at a time, starting from the top position then going in a clockwise direction.
In second shell, electrons are added one at a time in clockwise direction as a clock position – 12 o’clock, 3 o’clock, 6 o’clock, 9 o’clock positions.
Once you place the electrons one at a time to each of the four sides(Top – Right – Bottom – Left], start pairing or doubling them.
So, we have 10 remaining electrons of a Sulfur atom, and the 2nd shell can only hold a maximum of 8 electrons.
Therefore, put the 8 electrons of the Sulfur atom in the 2nd electron shell, start from the top position, put electrons one at a time, and go in a clockwise direction(Top – Right – Bottom – Left). And, finally, pair them up.
As we have a total of 16 electrons for the Sulfur atom and we placed 2 electrons in the first shell and 8 electrons in the second shell, hence, we are left with 6 electrons more.
Let’s place it in the next shell.
5. Draw the Third electron shell
The third shell is also called the M-shell and it has the capacity to hold up to 18 electrons but, for the elements in the first few periods, the third shell only holds up to 8 electrons.
“The third shell can be considered to hold 8 or 18 electrons but in total the third shell can hold 18 electrons.”
For the first few elements, say, till atomic number 20 on the periodic table, the third shell holds up to 8 electrons.
⇒ For atomic number 20 or less than 20, the third shell can hold up to maximum of 8 electrons.
⇒ For the atomic number more than 20, say, atomic numbers 21, 22, 23, 24, 25, 26, 27,…….etc., the third shell is filled with more than 8 electrons and up to maximum of 18 electrons.
For the Sulfur atom, the third shell is filled with the same procedure as the second shell.
So, we have left with only 6 electrons of a Sulfur atom, so, start from the top position, put electrons one at a time, and go in a clockwise direction(Top – Right – Bottom – Left). And, finally, start pairing.
Bohr model of the Sulfur atom
That’s all, this is our Bohr model of the Sulfur atom that contains 16 protons and 16 neutrons in the nucleus region, and 16 electrons are orbited around the nucleus, two electrons in the first shell, eight electrons in the second shell, and six electrons in the third shell.
- Oxygen Bohr model
- Boron Bohr model
- Beryllium Bohr model
- Lithium Bohr model
- Helium Bohr model
- Nitrogen Bohr model
- Fluorine Bohr model
- Neon Bohr model
- Carbon Bohr model
- Sodium Bohr model
- Silicon Bohr model
- Magnesium Bohr model
- Phosphorus Bohr model
- Chlorine Bohr model
- Argon Bohr model
- Aluminum Bohr model
- Potassium Bohr model
- Calcium Bohr model
- Bromine Bohr model
Find Valence electron of Sulfur through its Bohr diagram
Valence electrons are found in the outermost shell of an atom and they can take participate in the formation of a chemical bond. These electrons have more energy compare to the inner shell electrons.
From the Bohr diagram of an atom, we can easily find the number of valence electrons in an atom by looking at its outermost shell.
So, we have to find a valence electron in the Sulfur atom, for this, look at its Bohr diagram.
Bohr’s diagram of Sulfur has three electron shells (K, L, and M), the inner shell is K-shell and the outermost shell is M-shell.
Hence, the electrons found in the M-shell of the Sulfur atom are its valence electrons because it is the outermost shell that also called the valence shell.
The M-shell or outer shell of the Sulfur Bohr model contains 6 electrons, therefore, the number of the valence electrons in the Sulfur atom is also 6.
Electron dot diagram of a Sulfur atom
Electron dot diagram also called lewis structure which represents the valence electrons of atoms.
As, from the Bohr diagram of Sulfur, we got to know, it has 6 valence electrons.
So, just represent the 6 valence electrons around the Sulfur atom as a dot.
The electron configuration of Sulfur
“Electron configuration is the distribution of electrons of an atom or molecule in atomic or molecule orbitals”
Magnesium has an atomic number of 16 and it contains a total number of 16 electrons. From the Bohr model of Sulfur, we know, 2 electrons are in the K-shell, 8 electrons are in the L-shell, and 6 electrons are in the M-shell.
So, based on the shell, the electronic configuration of the Sulfur atom is [2, 8, 6].
Or the electronic configuration of Sulfur is 1s22s22p63s23p4 since it contains a total of 16 electrons.
How many electron shells a Sulfur Bohr model contains?
Electron shell also called energy level, you can find the number of electron shells for an element by knowing its period number in the periodic table.
The elements or atoms in the first period of the periodic table have one energy level or one electron shell, same as, the elements in the second period have two energy levels or two-electron shells and so on…
So, the Sulfur atom belongs to the 3rd Period in the periodic table, hence, the number of electron shells for the Bohr model of Sulfur will be 3 (K-shell, L-shell, and M-shell).
What is the outer shell of the Bohr diagram of the Sulfur atom?
The outermost shell also called the valence shell, which contains valence electrons of the atom.
According to the Bohr diagram of Sulfur, the outer shell is M-shell which contains six valence electrons.
Properties of Sulfur
- It is multivalent and nonmetallic in nature.
- It appears as bright yellow and crystalline solid at room temperature.
- It has a boiling point of 444.6 °C and a melting point of 115.21 °C.
- It can form several polyatomic molecules.
- It has an orthorhombic crystal structure.
- The Bohr model of Sulfur(S) is drawn with three electron shells, the first shell contains 2 electrons, the second shell contains 8 electrons and the third shell contains 6 electrons.
- Sulfur is neutral and its atomic number is 16, hence, the number of protons and electrons available for its Bohr diagram is also 16.
- The number of neutrons for the Bohr diagram of Sulfur can be found by subtracting the number of protons from the atomic mass(rounded to the nearest whole).
- The electron configuration of Sulfur in terms of the shell is [2, 8, 6], or in normal form, it is [Ne] 3s23p4.